S4 V8-4.2L (BHF) (2004)
Glove Compartment: Service and Repair
Glove Compartment Cover
Glove Compartment Cover, Removing And Installing
Removing:
-
Remove glove compartment.
-
Press pin - 1 - out in - direction of arrow - at connection between brake for glove compartment cover - 2 - and glove compartment cover - 3 -.
-
Open glove compartment cover.
There are holes on the inside of the glove compartment at the left and right by the hinge.
-
Knock the pins - 2 - on left and right out of the glove compartment - 1 - using a drift (4 mm).
If there is no hole, proceed as follows:
-
Pull pin - 2 - inward on left and right inward and remove using a pliers.
-
Remove glove compartment cover.
Installing:
Installation is reverse of removal.