S4 V8-4.2L (BHF) (2004)
Scuff Plate: Service and Repair
Rear Panel Sill, Removing and Installing
Rear Panel Sill, Removing And Installing
Special tools, testers and auxiliary items required
-
Torque wrench V.A.G 1783
1
-
Rear panel sill
-
Removal:
-
Remove rear panel trim.
-
Remove four bolts - 2 -.
-
Remove rear panel sill - 1 - upward.
-
Installing:
-
Check whether the four expanding nuts - 3 - are seated properly and replace them if necessary.
-
Position rear panel sill with four holes on expanding nuts - 3 -.
-
Thread in four bolts - 2 - through holes into expanding nuts - 3 -.