S4 V8-4.2L (BHF) (2004)
-
Remove bolts for head-level airbag in rear area.
-
Remove bolts - 3 -.
-
Remove trim - 1 - , unclip spring clip - 2 - to do so.
-
Installing:
Installation is reverse of removal. Observe the following when doing so:
-
Secure head-level airbag with new bolts.
-
Sealing rubber in rear side door must be laid over C-pillar trim.
CAUTION: Ensure trim is held securely.
2
-
Spring clamp
3
-
Screws, (2x)
-
Tightening torque 3.5 Nm