S4 V8-4.2L (BHF) (2004)
1
-
D-pillar trim
-
Removal:
-
Remove roof panel trim.
-
Remove bolt - 3 - by sliding covering plate in eyelets to the rear.
-
Release only the rear edge of luggage compartment side trim.
-
Unclip D-pillar trim - 1 - from top downward.
-
Remove D-pillar trim upward out of luggage compartment side trim.
-
Remove D-pillar trim to the rear from trim - 4 - above rear door.
-
Remove bolts for head-level airbag in rear area.
-
Remove bolts -6 -.
-
Remove trim - 5 -above rear side window.
-
Installing:
Installation is reverse of removal. Observe the following when doing so:
-
Secure head-level airbag with new bolts.
-
Slide D-pillar trim into mount for cover - 4 - above rear doors.
-
Slide D-pillar trim behind luggage compartment side trim.
-
Insert trim - 1 - into mounts using spring clips - 2 -.
-
Rear lid rubber must be laid over D-pillar trim.
CAUTION: Ensure trim is held securely.
2
-
Spring clamp
3
-
Screw
-
Tightening torque 9 Nm
-
To loosen and tighten, push covering plate in eyelet to the rear
4
-
Cover over rear door
5
-
Cover over rear side window
6
-
Screws, (2x)
-
Tightening torque 3.5 Nm