S4 V8-4.2L (BHF) (2004)
Oil Cooler: Service and Repair
Oil cooler, removing and installing
Special tools, testers and auxiliary items required
^
Oil collecting and extracting device V.A.G 1782
Removing
-
Remove Generator.
-
Remove bolts - arrows -.
-
Remove bracket for Generator.
-
Disconnect coolant hose - 1 - from oil cooler.
-
Place oil collecting and extracting device V.A.G 1782 under engine.
-
Remove bolts - arrows - and remove oil cooler.
Installing
Installation is performed in reverse order of removal. Note the following:
Note:
^
Replace O-rings.
^
Secure all hose connections using hose clamps appropriate for the model type
-
When installing generator bracket, note the two alignment bushings.
-
Install generator.