S4 V8-4.2L (BHF) (2004)
-
Tighten camshaft bolt - 2 - on exhaust camshaft of right cylinder head to final tightening torque.
^
Tightening torque: 100 Nm plus 1/4 turn (90°).
-
Remove crankshaft holder 3242.
-
Turn crankshaft two complete rotations in direction of engine rotation - arrow - until crankshaft stands at TDC again.
^
Slits - arrows - at front in camshafts must stand parallel at same height with upper edge of cylinder head.