S4 V8-4.2L (BHF) (2004)
Timing Cover: Service and Repair
Covers For Timing Chain, Removing and Installing
Covers for timing chain, removing and installing
Special tools, testers and auxiliary items required
^
Oil collecting and extracting device V.A.G 1782
^
Drill with plastic brush attachment
^
Protective glasses
^
Sealant
Removing
Note: All cable ties opened or cut during engine removal must be reinstalled at the same locations during installation.
-
Place oil collecting and extracting device V.A.G 1782 under engine and drain engine oil.
-
Remove engine
-
Disconnect engine and transmission
-
Leave engine on scissor lift platform VAS 6131 or secure engine to assembly stand
-
Remove dual-mass flywheel
-
Disconnect electrical harness connector - 1 - at Throttle Valve Control Module -J338-.
-
Disconnect crankcase ventilation hose - 3 - at intake pipe.
Note: Disregard - item 2 -.