S4 V8-4.2L (BHF) (2004)
-
Remove cover - 1 - in engine compartment (right side
-
Remove air guide hose - arrows -.
-
Remove cover - 1 - in engine compartment (left side).
-
Clamp off coolant hose - 2 - using hose clamp 3094 and disconnect from coolant expansion tank.
-
Seal connection using a plug that fits.
-
Remove bolt from coolant reservoir - arrow -.
-
Disconnect electrical wiring to Engine Coolant Level (ECL) Warning Switch -F66- at bottom on expansion tank and set aside coolant expansion
tank with coolant hose - 1 - connected.