S4 V8-4.2L (BHF) (2004)
-
Loosen quick-release screws - 1 -, remove screws - 2 - and remove sound insulation.
-
Remove bracket for sound insulation - arrows -.
NOTE: Flex joint in front exhaust pipe must not be bent more than 10, otherwise it may be damaged.
-
Disconnect exhaust system at left double clamp - left arrow -.
-
Place plunger of engine/transmission jack V.A.G 1383 A with a block of wood inserted in between - arrow - beneath rear crossmember.
-
Remove bolts - 1 - and - 2 -, then bolts - 3 - and - 4 -.