S4 V8-4.2L (BHF) (2004)
![background image](/audi/s4/v8-4.2l_(bhf)/Page-1409005.png)
-
Remove nuts - 1 to 3 - for right front exhaust pipe/exhaust manifold.
NOTE: Illustration shows engine/transmission assembly removed.
-
Disconnect front exhaust pipe from exhaust manifold.
-
Remove bolts - arrows - for right transmission mount at bottom.
-
Remove screws - 2 - and remove heat shield - B -.
-
Remove screws - 1 - and remove transmission support.
-
Remove front exhaust pipe with front and main catalytic converters.
Installing
Installation is performed in reverse order of removal, noting the following:
NOTE:
-
Replace self-locking nuts.
-
During installation, reinstall all cable ties at the same locations.