S4 V8-4.2L (BHF) (2004)
9. Fuel Level Sensor 2 -G169-
-
Drain fuel tank before removing
10. Vacuum booster
-
With lines
-
secured to fuel level sensor 2
-
Various versions.
Part II
1. Distributor piece
-
Clipped in on baffle housing with 3 catches
-
To remove, press toward left so that catches disengage and lift upward
-
Insert fuel line into baffle housing when installing
-
To remove the Fuel Pump (FP), union piece must be unclipped so that fuel return line (from connector flange) can be disconnected
-
Various versions.
2. Baffle housing lower part
-
With suction jet pump
3. Electrical wire
-
To Fuel Level Sensor 2 -G169-
-
Connect on connector flange
4. Electrical wire
-
To Sender for fuel gauge -G-
-
Connect on connector flange
5. Harness connector
-
For Fuel Pump (FP) and all senders for fuel gauge
-
Releasing, See Fig. 1.
6. Fuel return line
-
Clipped in front on fuel tank
-
Mark before removing
7. Fuel supply line
-
To fuel filter
-
Clipped in front on fuel tank
-
Mark before removing