S4 V8-4.2L (BHF) (2004)
9. 2 Nm
10. Heat shield
-
For fuel filler tube.
11. Vent line
-
Rear end
-
To EVAP canister
-
Clipped in at top of fuel tank
-
Remains on fuel tank when fuel tank is removed
12. Bolt M8 x 28 with permanent washer
-
Tighten to 23 Nm
-
Serves to secure fuel filler neck and Ground (GND) connection -item
13. Overflow hose
14. Cap
15. Seal
-
Replace if damaged
16. Tensioning ring
17. Rubber top
18. Ground (GND) connection.
-
Installed position / check requirements.
-
Ensure secure seating of connector and secure wire with front securing bolt for fuel filler tube -item
-
After installing, check electrical connection of metal ring at fuel filler tube to a blank portion of chassis using Ohm meter. Specified value:
approx. 0 ohm
19. Fuel filler tube with Expansion tank
20. Vent line
-
To EVAP canister
21. Fuel tank