S4 V8-4.2L (BHF) (2004)
-
Release retaining clip - arrow - and detach housing cover for high beam headlamp bulb from headlamp housing.
-
Disconnect electrical connection - 3 - at high beam headlamp bulb.
-
Release retaining clip - 2 - and remove bulb - 1 - from housing.
Installing
Install in reverse order of removal, noting the following:
CAUTION:
-
Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that evaporates on the
bulb during operation can cause the glass to cloud over.
-
When installing housing cover, ensure proper seating. Water intrusion will damage headlamp.
-
Secure bulb with retaining clip.
-
Secure housing cover with retaining clip.