S4 V8-4.2L (BHF) (2004)
-
Disengage Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80- - 1 - from air guide.
-
Remove bolts - arrows -.
-
Remove air guide - 2 -.
CAUTION: Fuel system is under pressure! Before opening system, place rags around the connection. Then release pressure by carefully loosening
connection.
Engine code BHF
-
Unscrew fuel hose from connection on fuel rail pipe by counterholding using an open-end wrench at hex head - 1 - and - 3 - and unscrewing union
nut - 2 -.
All:
-
Disconnect electrical harness connector - 2 - from Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80-.
-
Disconnect electrical harness connector - 3 - at Mass Air Flow (MAF) Sensor -G70-.
-
Disconnect hose - 1 - to Secondary Air Injection (AIR) pump.
-
Disconnect air guide hose - 4 - at Mass Air Flow (MAF) sensor.
-
Move wiring harness clear at air filter housing.
-
Remove clip and remove air filter housing with Mass Air Flow (MAF) sensor.