S4 V8-4.2L (BHF) (2004)
Relay Box: Service and Repair
4-Way Relay Carrier In Electronics Box In Plenum Chamber, Removing and Installing
4-way Relay Carrier In Electronics Box In Plenum Chamber, Removing And Installing
Removing
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
-
Remove rubber seal of plenum chamber cover in direction of - arrow -.
-
Remove plenum chamber cover - 1 - to front.
-
Use screwdriver to pry off the two caps - 3 -.
-
Loosen nuts - 4 - (do not remove).
-
Remove wiper arms - 2 - from wiper shaft by tilting slightly.
-
Remove nuts completely and remove wiper arms.
-
Pull off retaining clips - 1 - and detach cowl panel grille - 5 -.
-
Remove cover for electronics box in plenum chamber - arrows -.