S4 V8-4.2L (BHF) (2004)
/Page-3467006.png)
-
Disconnect connector - 1 - from ignition pill - 2 -.
-
Installing:
CAUTION:
-
Note safety precautions for working on airbags and side curtain airbags.
-
Always follow side curtain airbag installation procedure.
-
Clip bracket - 3 - into roof frame.
-
Clip in brackets - 4 -,- 5 -,- 6 - and - 7 -.
-
Tighten bolt - 3 -.
-
Engage side curtain airbag at threaded pins and tighten nut - 1 - by hand.
-
Tighten bolts - 2 -.
-
Tighten bolts - 4 -, - 5 - and - 7 - and and.
-
Tighten bolt - 6 -.
-
Tighten nuts - 1 -.
Installation is reverse of removal, noting the following:
-
Switch on ignition.
CAUTION: No one should be in vehicle when connecting battery.
-
Connect the battery ground (GND) strap.
NOTE:
-
Follow safety measures after connecting battery.
-
If the Airbag Malfunction Indicator Lamp (MIL) K75 shows a malfunction after assembly, DTC memory must be checked with Vehicle
Diagnostic, Testing and Information System VAS 5051 A, cleared and then rechecked.