S4 V8-4.2L (BHF) (2004)
6
-
Belt height adjustment
-
Removal:
-
Remove upper B-pillar trim - 5 -.
-
Remove bolt - 7 - and bolt - 8 -.
-
Remove belt height adjuster - 6 - upward.
-
Installing:
Installation is reverse of removal.
NOTE:
-
Button - 10 - must not be pressed during installation.
-
Function test after installing trim:
-
Height adjuster must audibly engage into all five possible positions (even top position).
-
Button must return by itself to upper position after being actuated.
7
-
Screw
-
Tightening torque 55 Nm
-
Belt relay must swivel by itself in carrier direction after tightening screw.
8
-
Screw
-
Tightening torque 23 Nm
9
-
Connector
10
-
Height adjustment button