S4 V8-4.2L (BHF) (2004)
Turn Signal Switch: Service and Repair
Turn Signal Switch E2, Removing And Installing
Removing
-
Remove steering column switch module.
CAUTION:
-
Ensure steering is in straight ahead and centered prior to removing spiral spring.
-
Position of spiral spring must not be changed once removed.
-
Carefully release clip fasteners - arrows - and remove spiral spring - 1 - from steering column switch module.
-
Remove Steering Angle Sensor G85 - 1 - from Steering Column Electronic Systems Control Module J527in direction of -arrow -.
-
Remove screws - arrows -.
-
Remove the Steering Column Electronics Systems Control Module J527. 2 - and Windshield Wiper/Washer Switch E22 -3 - from steering column
switch module.
-
Remove Cruise Control Switch E45 - 1 - from steering column switch module.
-
Remove screw - 5 - and remove retaining clip - 4 -.