S4 V8-4.2L (BHF) (2004)
Fuel Level Sensor: Service and Repair
Fuel Level Sensor G, Removing and Installing - Up to 10.04
Fuel Level Sensor G, Removing And Installing
Special tools, testers and auxiliary items required
-
Wrench 3087
Removing
-
Observe safety precautions
-
Observe rules for cleanliness.
CAUTION:
-
To remove the locking flange, the fuel tank may only be filled to a maximum of 1/4. Drain fuel tank if necessary. Procedure.
-
Observe procedures for disconnecting battery.
-
Push cover over battery toward right - arrow 1. and remove it upward - arrow 2.
-
With ignition switched off, disconnect Battery Ground (GND) strap - arrow -.
-
Open fuel filler flap briefly and then close again.