S4 V8-4.2L (BHF) (2004)
Vehicles from 11.04:
-
Remove electrical wire - 3 -.
-
Remove screws - 2 - and - 4 -.
-
Unclip appropriate socket - 1 -.
NOTE: Refer to the applicable wiring diagram for exact identification of connections on connector station Wiring Diagrams
Installing
Install in reverse order of removal, noting the following:
-
Reconnect battery.
Tightening torques
Component
Nm
Connector point in plenum chamber
3
electronics
box to central tube for instrument panel
Bolt connection for electrical wires
9