S4 V8-4.2L (BHF) (2004)
Relay Box: Service and Repair
9-Position Relay Carrier, Removing and Installing
9-position Relay Carrier, Removing And Installing
Removing
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
-
Where applicable, remove drivers storage compartment.
-
Remove nuts - 3 - remove Vehicle Electrical System Control Module J519 with wires attached.
-
Remove 9-position relay carrier - 4 -.
NOTE: Disregard - 1 - and - 2 -.
-
Unclip the fuse carriers at the 9-position relay carrier.
-
Remove relays and control modules and then unclip appropriate relay carrier.
NOTE: Refer to the applicable wiring diagram for exact identification of connections on relay carrier Wiring Diagrams.
Installing
Install in reverse order of removal, noting the following:
-
Install drivers storage compartment.
Tightening torque
Component - fastener
Nm
9-position relay carrier to central
2.4
tube for instrument panel - nut