S4 V8-4.2L (BHF) (2004)
Steering Column Control Module: Service and Repair
Steering Column Electronics Systems Control Module J527, Removing and Installing
Steering Column Electronics Systems Control Module J527, Removing And Installing
Removing
NOTE: Should the Steering Column Electronic Systems Control Module J527 require replacement, follow applicable component "Replacement"
procedure using VAS 5051/5051 in operating mode "Guided Fault Finding".
-
Remove steering column switch module.
CAUTION:
-
Ensure steering is in straight ahead and centered prior to removing spiral spring.
-
Position of spiral spring must not be changed once removed.
-
Carefully release clip fasteners - arrows - and remove spiral spring -1 - from steering column switch module.
-
Remove Steering Angle Sensor G85 -1 - from Steering Column Electronic Systems Control Module J527in direction of -arrow -.
-
Remove screws - arrows -.
-
Remove Steering Column Electronics Systems Control Module J527 -1 - from steering column switch module.
Installing