S4 V8-4.2L (BHF) (2004)
-
Unbolt shock absorber from wheel bearing housing - 1 -.
Vehicles with comfort/heavy-duty suspension
-
Remove stone shield from trapezoidal link.
Continued for all vehicles
-
Unfasten bolts to remove parking brake cable from bracket below trapezoidal link.
-
Remove brake caliper - arrows -. Use socket T40027.
Note:
^
Tie up brake caliper to body with wire.
^
Do not suspend the brake caliper from the brake hose.
-
Remove wheel speed sensor and cable guide.
-
On vehicles with headlight range control, disconnect connector from vehicle level sensor.
All wheel drive vehicles
-
Remove drive shaft from rear final drive.
-
Secure drive shaft to body with wire.
-
Disconnect parking brake cables from fuel tank.