S4 V8-4.2L (BHF) (2004)
![background image](/audi/s4/v8-4.2l_(bhf)/Page-3154001.png)
Rear Cross-Member Bushing: Service and Repair
Bonded Rubber Stop Wedges
Bonded rubber bushings stop wedges, removing and installing
Removing
-
Remove subframe support.
-
Pull stop wedges downward out of bonded rubber bushings.
Installing
-
Press stop wedges - 1 - into bonded rubber bushings as far as stop (positions as shown in illustration).
Illustration shows subframe from below.
-
Install subframe support.