S4 V8-4.2L (BHF) (2004)
/Page-2359002.png)
-
Pry off the two caps - 3 -.
-
Remove nuts - 4 - and remove the two wiper arms - 2 -.
-
Remove clips - 1 - and disconnect cowl panel grille - 5 -.
Remove the electronics box from the plenum chamber as follows:
-
Unscrew bolts - arrows - and take off the cover.
-
Use screwdriver to carefully pry off retaining strap - arrow -.
-
Lay aside engine control module with connectors attached.
-
Disconnect connectors - 2 - at connector console.
-
Remove electrical wiring connection - 1 -.
