S4 V8-4.2L (BHF) (2004)
/Page-2360008.png)
-
Install driver's storage compartment:
-
Bleed clutch system .
-
Insert electronics box and tighten nuts -arrows- to 4 Nm.
-
Route engine wiring harness and attach connection in connector station.
-
Install engine control module plus auxiliary relay carrier and auxiliary fuse holder, if installed.
-
Push on cover lid by hand and tighten bolts diagonally - 4 Nm.
See Caution for connecting Telematics battery
If the battery is reconnected remember to check and activate vehicle equipment (radio, clock, convenience electric etc.).