S4 V8-4.2L (BHF) (2004)
-
Slide complete pedal assembly forward, toward transverse wall, insert bolt (arrow - 3 -) and tighten by hand. At the same time, second technician
must insert tube from plenum chamber into master cylinder.
-
Tighten bolts for brake booster (arrows) to 25 Nm.
-
Press securing clip - C - in to stop.
-
Insert tube - B - into master cylinder until the tube engages audibly.
-
Insert rubber grommet - D - into transverse wall above connecting tube/after-run hose - A -
-
Slide on after-run hose - A - to brake fluid reservoir to stop.
-
Remove special tool 3094.