S4 V8-4.2L (BHF) (2004)
-
Tighten bolts for brake booster (arrows) to 25 Nm.
-
Press securing clip -C- in to stop.
-
Insert tube -B- into master cylinder until the tube engages audibly.
-
Insert rubber grommet -D- into transverse wall above connecting tube/after -run hose-A-.
-
Slide on after-run hose -A- to brake fluid reservoir to stop.
-
Remove special tool 3094.
-
Tighten socket head bolt (arrow) for pedal assembly to 25 Nm.
-
Connect master cylinder to clutch pedal. Engage bolt lock into clutch pedal.
-
Bleed clutch system after installing master cylinder, Refer to Clutch, MT, Service and Repair.