S4 V8-4.2L (BHF) (2004)
-
Remove left front exhaust pipe and catalytic converter.
All Vehicles
-
Remove bolt - arrow - and remove the slave cylinder to the rear.
-
Do not press clutch pedal after clutch slave cylinder has been removed.
-
Clamp the pipe/hose line with a Hose Clamps up to 25 mm Diameter. (3094).
-
Release the retaining clip - A - with a screwdriver and pull it all the way out.
-
Remove the pipe/hose line from the slave cylinder.
Install slave cylinder.
-
Install in reverse order, paying attention to the following: