S4 V8-4.2L (BHF) (2004)
![background image](/audi/s4/v8-4.2l_(bhf)/Page-2391011.png)
The following frictional torques should be set:
Fig. 17 Removing nut for drive pinion
-
When the nut has been locked the radial run-out on the drive shaft flange should be measured.
The following frictional torques should be set:
Fig. 17 Removing nut for drive pinion
-
When the nut has been locked the radial run-out on the drive shaft flange should be measured.