S4 V8-4.2L (BHF) (2004)
/Page-2393005.png)
-
Drive in seal for drive shaft flange onto stop with drift 3026.
-
Drive the drive shaft flange onto the drive pinion until the securing nut can be mounted.
Note: Use the old hexagon nut to reattach the flange to the drive pinion. Otherwise the original installed position will not be relocated.
-
Clean drive pinion nut and threads on drive pinion of oil and grease residues. Thinly coat threads with locking fluid D 000 600.
Note: The number of turns when reattaching must be the same as during unscrewing.
