S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
-
Remove bolts - 2 - and remove strut.
-
Remove brake disc and brake disc cover.
Continued for all vehicles
-
Position engine and transmission jack V.A.G 1383 A with universal transmission support V.A.G 1359/2 and a corresponding wooden block at
subframe or final drive (Fig. for vehicles with front wheel drive).
-
Tighten band around subframe or final drive.
CAUTION!
Before -LOOSENING- subframe bolts, secure vehicle against tipping over (e.g. load luggage compartment with approx. 50 kg).
-
Remove subframe bolts - arrows -.
Vehicles with front wheel drive
-
Lay parking brake cable with brake caliper over transverse link.
-
Carefully lower subframe. Guide subframe so it does not shift.
Vehicles with all-wheel drive
-
Carefully lower subframe approx. 15 cm. Guide subframe so it does not shift.
-
Slide subframe left so that right parking brake cable with brake caliper can be laid over transverse link.
Note:
^
Ensure brake hose is not stretched.
-
Slide subframe right so that left parking brake cable with brake caliper can be laid over transverse link.
-
Lower subframe.
Installing