S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
/Page-915008.png)
‹› Lightly pressing in an extra 0.5 mm is permitted.
-
Pull drill out of alignment hole, which loosens the right chain tensioner.
-
Insert trim removal wedge (3409) as shown in illustration and bring chain tensioner into contact with trim removal wedge (3409).
‹› Lightly pressing in an extra 0.5 mm is permitted.
-
Using key (T40049), rotate crankshaft in direction of engine rotation - arrow - to TDC ignition timing.
‹› If rotated unintentionally beyond TDC, turn back crankshaft again approximately 30° and set to TDC again.
