S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
Fluid - M/T: Service and Repair
0A3A Transmission
Manual Transmission, Checking Gear Oil Level
Procedure
‹› To check transmission oil level, vehicle must be level.
-
Remove oil filler plug - arrow - to check transmission oil.
Check oil level with self-made tool, e.g. a bent wire.
Oil level with transmission code GYH
‹› Specification: The oil level is correct when the transmission is filled up to the lower edge of the filler hole.
Oil level with all other transmission codes
‹› Specification: Oil level 2 ± 1 mm below upper edge of filler hole.
-
Top off transmission oil if necessary. Specification, Refer to => [ Audi A4 Engine Codes, Transmission Allocation, Ratios, Capacities, from MY
2001 ] .
-
Install oil filler plug.
Tightening Specifications