S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
‹› Replace gaskets.
‹› The oil drain plug and seal must be replaced.
-
Clean all magnets in the depressions of the oil pan. Ensure that the magnets are in full contact with the oil pan.
-
Thoroughly clean the sealing surface, removing the residual gasket material completely.
-
Tighten oil pan bolts diagonally in several stages.
-
Tighten new drain plug - 1 -.
-
Fill with ATF. Refer to => [ ATF, Draining or Filling after Repair ] See: Fluid - A/T/Service and Repair/09LA Transmission/ATF, Draining or
Filling After Repair.
Tightening Specifications
*
Replace bolt.
*
Tighten diagonally in stages.