S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
/Page-1550001.png)
Shifter A/T: Removal and Replacement
Selector Mechanism Cover, Removing and Installing
Selector mechanism cover, removing and installing - 09L, 6 Speed AWD A/T
Removing
-
Remove selector lever handle.
-
Open ashtray on center console and remove trim - arrows -.
-
Release 4 retainers - arrows - and lift off cover - 1 - including guide.
-
Disconnect electrical connector from side of guide.
Installing
Installation is performed in reverse sequence. Note the following:
-
Install selector lever handle.