S4 Quattro Cabriolet V8-4.2L (BHF) (2008)
Flex Plate: Service and Repair
Drive Plate
Drive Plate
Special tools, testers and auxiliary items required
‹› Counter-holder tool (10-201)
Removing
‹› Transmission removed.
-
Mark drive plate and washer to the crankshaft.
-
Insert counterhold tool (10-201) to loosen bolts.
-
Remove drive plate.
Installing
Installation is in reverse order of removal, note the following:
-
Install drive plate with washer.
-
Use new bolts when securing.
-
Turn over counterhold tool (10-201) to tighten bolts.
Tightening specification
*
90° corresponds to one quarter rotation.
*
Replace bolts.