S4 Quattro Sedan V6-2.7L Turbo (APB) (2000)
Power Mirror Motor: Service and Repair
Power Mirror Adjuster, Replacing
-
Disconnect battery.
-
Remove mirror glass.
-
Remove screws - 1 - (3x).
Tightening torque: 1 Nm (9 in.lb)
-
For mirror adjusting units with harness connectors, these should be removed before disassembly.
NOTE: For mirror adjusting units with soldered wires, these should be separated individually directly at the housing.
-
Install wiring into connector housing enclosed with replacement unit.
NOTE: Transfer wire routing from old power mirror adjuster using correct wiring diagram.