S4 Quattro Sedan V6-2.7L Turbo (APB) (2000)
/Page-1337002.png)
-
Install new gasket on water pump flange.
-
Install coolant pump -2- into cylinder block and tighten all 9 mounting bolts (arrow-2-) to 10 Nm (7 ft. lbs.).
-
Install rear toothed belt guard on water pump housing (arrow-1-).
Tightening torque: 10 Nm (7 ft. lbs.).
-
Install and tension toothed belt, Refer to Timing Belt, Service and Repair
-
Install toothed belt guard.
-
Install ribbed belt, Refer to Drive Belt, Service and Repair
-
Fill cooling system with coolant.
