S4 Quattro Sedan V6-2.7L Turbo (APB) (2000)
/Page-4924001.png)
Headlamp Alignment Actuator: Service and Repair
Headlight Beam Adjusting Motor (high Intensity Gas Discharge - Xenon- Headlights), Removing And Installing
NOTE: Always adjust headlights after headlight beam adjusting motors are removed, installed or replaced.
Removing
-
For right headlight, remove back portion of intake air duct.
-
Remove cover from headlight housing.
-
Release headlight beam adjusting motor -1- on right headlight by rotating clockwise and on left headlight by rotating counterclockwise.
-
Release ball joint from its socket by pushing laterally to left on right headlight and push to right on left headlight.
-
Disconnect harness connector -2-.
Installing
-
Install in reverse order of removal.
