S4 Quattro Sedan V6-2.7L Turbo (APB) (2000)
2. Spring clip
-
Press into pedal cluster from behind
3. Pedal cluster
4. Brake light switch -F
a - Clearance: max. 0.7 mm (0.028 inch)
Note: The switch must be installed only once in order to assure that it is adequately tight.
Adjusting switch
-
Insert switch -4- into installed clip -2 and press in to stop.
Note:
-
As a result of this step, the brake pedal must not be under preload.
-
If necessary, turn switch back somewhat, noting clearance -a-.