S4 Quattro Sedan V6-2.7L Turbo (APB) (2000)
Hazard Warning Switch: Service and Repair
Switches, removing and installing
Removing
-
Insert small screwdriver or flat plastic tool as shown, press against opposite side of switch and pry off switch plate.
-
Tape off area above switches or front of radio with masking tape, if necessary.
-
Pull switch out forward using standard or flat-nose pliers.
-
Disconnect harness connector.
Installing
-
Press switch plate onto switch so it engages audibly.
-
Connect harness connector and press switch in by hand as far as possible.