S4 Quattro Sedan V6-2.7L Turbo (APB) (2000)
/Page-960002.png)
Sport suspension 1BE
A Spring compression
B Spring extension (rebound)
B1 Defined starting position (vehicle at curb weight)
On vehicles with sport suspension, suspension must be extended 20 mm (0.78 inch) to this position.
B2 Vehicle suspension extended 60 mm (2.36 inch) compared to position B1, Refer to Setting suspension to starting position B1 below
C Toe-in
C1 Toe-in measured in position B1
C2 Toe-in measured in position B2
D Toe-out
V Toe-in curve
S Toe constant, C2-C1
Notes: The toe-in curve must also be checked in the cases (in addition to those specified in table, Refer to Suspension Codes, Checking
Requirements.
-
If the vehicle has been in an accident or sustained damage to the suspension components and/or bodywork.
-
If the vehicle does not maintain direction of travel over bumps and when braking or accelerating.
Standard suspension 1BA, special suspension (1BC) and heavy duty suspension 1BP
On vehicles with standard running gear, the toe-in measurement C1 is measured in the defined starting position (vehicle at curb weight) B1.
B2 Vehicle suspension extended 60 mm (2.36 inch) compared to position B1
C2 Toe-in measured in position B2
Heavy duty suspension 1BB (vehicle ride height 20 mm higher)
On vehicles with heavy duty suspension 1BB:
