S4 Quattro Sedan V6-2.7L Turbo (APB) (2000)
Maintenance Required Lamp/Indicator: Service and Repair
Channel 42 (Min. Mileage)
Minimum Mileage
With this function, a minimal mile performance for the service display will be specified.
Initiate Adaption Function. See: Adaptation Function Initiation
Indicated on display
-
Press -1- and -0- and confirm by pressing the -Q- button.
Indicated on display
Rapid data transfer Q
10 - Adaptation
-
Press -Q- button to confirm input.
Indicated on display:
Adaptation
Input channel number XX
-
Press buttons 4- and -2-.
-
Press -Q- button to confirm input.
Indicated on display:
Channel 42 Adaptation 8 Q
min-value oil in 1000 Miles <- 1 3 ->
The minimum mileage performance up to a service will be displayed (here for example 8 represents 8000 miles).
Note:
-
The adaptation value entered for the relevant engine variant must match the value in the table. Please refer to Adaptation values. See: Table
For Channels and Adaption Values
-
Input of current specified value is only possible in units of 1000, therefore indication in display also changes in 1000 units.
-
In countries where speedometers are calibrated in miles, adaptation can be performed in miles.
-
Values can only be input directly using the scan tool keypad.
-
If an incorrect value is input, the 'Adaptation" function is terminated and must be re-initiated.
-
Press -> button.
Indicated on display:
Channel 42 Adaptation 8
Input adaptation value XXXXX
-
Input specified value using keypad, filling initial positions with "0".
Specification: 8000 Miles i.e. 5000 Miles (1.8L Turbo)
Keypad input: 00008
Indicated on display:
Channel 42 Adaptation 8 Q
Input adaptation value 00008
-
Press -Q- button to confirm input.
Indicated on display:
Channel 42 Adaptation 8 Q
min-value oil in 1000 Miles <- 1 3 ->
-
Press -Q- button to confirm input.
Indicated on display:
Channel 42 Adaptation 8 Q
Store changed value?
-
Press -Q- button to confirm input.
Indicated on display:
Channel 42 Adaptation 8 ->