S4 Quattro Sedan V6-2.7L Turbo (APB) (2000)
Fuel Level Sensor: Testing and Inspection
Fuel Tank Level Signal, Checking
NOTE:
-
The Engine Control Module (ECM) receives the fuel tank level signal from the instrument cluster.
-
The processed signal enters on terminal 30 the Engine Control Module (ECM) and is used to determine certain malfunctions (e.g.: misfire)
-
Connect VAG1598/31 test box to wiring harness for engine control module. Do not connect to the engine control module itself. Refer to "Scan
Tool Testing/Wiring And Component Check With VAG1598/31 Test Box", See: Powertrain Management/Computers and Control
Systems/Testing and Inspection
-
Check wiring from test box socket 30 to instrument cluster according to wiring diagram for an open circuit and short circuit to B+/Ground (GND).