S4 Quattro Sedan V6-2.7L Turbo (APB) (2000)
Fig. 8 Pressing wheel bearing into 85 mm diameter wheel bearing housing
Note:
Large inner diameter of wheel bearing faces toward wheel hub.
Fig. 9 Pressing wheel hub into 75 mm diameter wheel bearing
CAUTION:
When installing) VW519 sleeve must exert force only against the bearing inner race.
Make sure that the wheel bearing housing does not exert farce against the wheel hub. Otherwise there is the risk of damaging the
wheel bearing.
The wheel bearing housing must remain as horizontal as possible when pressing in the hub. Otherwise the wheel hub will cant in
the wheel bearing, which will lead to early wheel bearing damage.
Fig. 10 Pressing wheel hub into 85 mm wheel bearing