S4 Quattro Sedan V6-2.7L Turbo (APB) (2000)
Part II
1. Shift control mechanism with shift housing
2. Tensioning ring
3. Boot
^
Carefully pull over shift rod during removal
^
Set onto marks of shift rod and pivot rod when installing
4. Socket head bolt, 25 Nm
5. Clamp
6. Shift rod
^
Do not disconnect connecting rod Fig. -8 from shift rod; observe note, Refer to Selector Mechanism, Removing and Installing
7. Nut, 25 Nm
8. Connecting rod
^
Do not disconnect from shift rod; observe note, Refer to Selector Mechanism, Removing and Installing
9. Bolt, 25 Nm
10. Washer
11. Socket head bolt, 25 Nm
12. Front shift rod
^
With bearing bushing, bolt and washers
13. Bolt, 40 Nm
^
Part of front shift rod