S4 Quattro Sedan V6-2.7L Turbo (APB) (2000)
Specified values for angle of wiper arm to windshield
Driver's side
-3 °
Passenger side
-3 °
Tolerance
±0 °
Adjusting wiper arms
-
Bring wiper arms into park position.
-
Remove wiper blade.
-
Place wiper arm -2- in 3358 windshield wiper adjuster and lock in place with stop screw -3-.
-
Place 24 mm open end wrench -1- onto adjusting device as shown and set wiper arm -2- to specified value (arrow)
Specified values.
-
Loosen stop screw -3- and remove wiper arm -2- from adjusting device.
-
Again place wiper arm -2- into 3358 windshield wiper adjuster and again lock in place with stop screw -3-.
-
Compare displayed angle with specified value.
-
If necessary, repeat setting and checking procedure until specified value is attained.
-
Remove adjusting device and install wiper blade.