S4 Quattro Sedan V8-4.2L (BHF) (2005)
Fuel Gauge Sender: Service and Repair
Fuel Level Sensor 2 G169, Removing and Installing - From 11.04
Fuel Level Sensor 2 G169, Removing And Installing
Special tools, testers and auxiliary items required
-
Wrench 3087
Removing
Observe safety precautions.
Observe rules for cleanliness.
CAUTION:
-
To remove fuel level sensor 2 G169, the fuel tank may only be filled to a maximum of 1/4. Drain fuel tank if necessary. Procedure
-
Observe procedures for disconnecting battery
-
Push cover over battery toward right - arrow 1. and remove it upward - arrow 2.
-
With ignition switched off, disconnect battery Ground (GND) strap - arrow -.
-
Open fuel filler flap briefly and then close again.