S4 Quattro Sedan V8-4.2L (BHF) (2005)
-
Remove screws - arrows -.
-
Remove condenser with refrigerant lines attached and lower downward.
-
Remove screws at lock carrier left and right - arrows -.
-
Remove front hood sealing gasket from lock carrier and fenders.
-
Remove bolts at impact absorbers - arrows - (left and right).
NOTE: Use an assistant to remove lock carrier in the following step.
-
Remove lock carrier and tilt aside (secure against falling).
-
Release hose clamp - 2 - and remove coolant hose from right coolant pipe.
-
Release hose clamp - 1 - and remove coolant hose from coolant pipe.
NOTE: Engine shown removed in illustration for clarity.
CAUTION: Before removing ribbed belt, mark direction of rotation. Belt damage will result if not reinstalled in proper direction.